Insuflect-250 Datasheet - The Zippertubing Company

13000 S. Broadway
P.O. Box 61129
Los Angeles, CA 90061
(800) 321-8178
(310) 767-1714 FAX
www.zippertubing.com

Insuflect-250
Aluminized Fiberglass & Silica Glass Composite Jacket, Up to 250ºC
High temperature composite heat barrier designed to protect wiring, hoses, pipes or electronic modules. Insuflect-250 is the ideal material for providing thermal protection at temperatures of 250ºC continuous (300ºC/minutes). The material yields an outstanding thermal effectiveness value of 95ºC when tested per SAE J2302 at 482ºC. This level is well beyond the capabilities of classic single layer, aluminized fiberglass heat reflective materials. Insuflect-250 is available as a wrap around product using a stainless steel snap button closure or as a pull-thru jacket sewn closed with high temperature Kevlar thread. Insuflect-250 was developed to extend the survivability of sensitive components in a world of ever increasing under-hood temperatures.
Features & Benefits: Ideal for Trucks and Busses Proven Performance to SAE J2302 Durable and Effective Outperforms Standard Aluminized Fiberglass Custom Sizes and Shapes Available -50 to 250ºC Operational Limit

Build Part Number

Thickness (inch)	Material Type	Temp Range (°C)	Flame Retard	Break Strength	Ratings	Dielectric (volts/mil)
1/8" (approx)	Aluminized Fiberglass / Silica Glass (3 Layer Composite)	-50 to 250	Non-Flammable	N/A	Commercial	N/A

EMI Shields Available	Flexibility	Fluid Resist	Cable Types	Sizes	Colors	Closures Available
N/A	Moderate	Water Resistant	Round	1.0" & Up w/ Snaps; 3/4" & Up Sewn N/A	Aluminum / Gray	Stainless Steel Snaps & Sewn (Kevlar)

For more information contact Customer Support: info@zippertubing.com

Specifications subject to change without notice. All statements and technical information contained herein are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed under all circumstances. Before using Zippertubing products, the user shall determine suitability for the intended use, and user assumes all responsibility for improper selection. Published attenuation values of Zippertubing shielding have been verified by laboratory testing of the respective shielding materials. Actual installed attenuation values may differ due to installation techniques and final assembly operation parameters, which are beyond the control of the Zippertubing Company. Actual attenuation values can only be determined by the end user testing the completed assembly. U.S. and International Patents and Patents Pending. Copyright 2009 The Zippertubing Company, Los Angeles, California.