TSH-3 - The Zippertubing Company

1-800-321-8178 Home | Find Partner | Search | Family of Companies | Site Help

Home > Products > EMI Shielding Solutions > Foils > TSH-3

Search

Products

Cable Management

Extruded Films

Coated Fabrics

Heat Shrink (No Shield)

EMI Shielding

Heat Shrink Tubing (Shielded)

Thermal Protection

Moderate Temp < 260°C

High Temp > 260°C

Heat Shrinkable Tubing

Closure Options

Installation Tools

Slider

Pliers

TSH-3

FEP Teflon Jacket with 3-Mil Aluminum Foil EMI Shield
TSH-3 is an outstanding EMI shielding product consisting of a FEP Teflon outer jacket bonded to a 3-mil Aluminum foil EMI shield. The product was designed to provide outstanding EMI shielding performance in rugged and demanding environmental applications where only FEP Teflon can survive. TSH-3 is currently in use on many aerospace programs as well as in commercial building Plenum rated areas. TSH-3 is a non-flammable product that meets UL224, VW-1 and has an operational temperature range of -70 to 200ºC. Standard TSH-3 comes with a FEP Teflon Z-Track closure and a 15 AWG Tin/Copper drain wire. The material is also available with several other closure types; however these may reduce the overall performance characteristics somewhat.

Benefits

Excellent EMI Shielding (10 MHz to 20 GHz)
Excellent heat & chemical resistance
Minimal flexing applications
Non-flammable, UL224, VW-1
Aerospace Qualified
Operating temperature -70ºC to +200ºC

Data Sheet Info Build Part Number Tools Installation Instructions

Thickness (inch)	Material Type	Temp Range (ºC)	Flame Retard	Break Strength	Ratings	Dielectric (volts/mil)
.008"	3-mil Al Foil + 5-mil FEP Teflon Film Backing	-70 to 200	Non-Flammable	40 psi (burst, foil only)	QQ-A-1876, Type I, Grade B	Conductive, .070 ohms/ft per inch width

EMI Shields Available	Flexibility	Fluid Resist	Configurations	Sizes	Colors	Closures
N/A	Low Flex Life	Excellent	Round, Flat & Rect	1/2" & Up Round, 1-1/4" & Up Flat 1-1/4 & Up	Aluminum / Clear	Z-Track (FEP), Zipper, H & L, Snaps

Build Part Number
Starting with TSH-3

ZTZ-SP Plier

The ZTZ-SP tool is a Stainless Steel plier tool designed for closing Zippertubing Z-Track products. It is required for all Z-Track installations. The small hand held plier tool utilizes small finger lips to spread the channel cavity of the Z-Track extrusion. At the same time the arrowhead side of the extrusion is forced into the open channel cavity. As the tool slides along the cable run the channel cavity closes behind the tool which traps the arrowhead barbs within. The tool makes closing Z-Track fast and easy while minimizing operator fatigue. As the tool slides along the cable run, it will form the jacket material into a continuous tube. Use the ZTZ-SP tool for all production line and field installations. Refer to the "How to Use" document for detailed instructions on ZTZ-SP tool.

Order Part Number: ZTZ-SP Plier

Installation Guides, Related Documents and Videos:

ZTZ-SP Plier Tool Instructions

Termination & Splicing of Zippertubing Shields

“ZTZ-SP” Plier Tool

More Info


		Brochure
		Receiving Inspection
		Shelf Life Data
		Customer Survey

Build Part Number

	Build Part Number

Contact Us

	Contact one of our Engineers, Sales or Support members directly.
	Contact Info

Home | Find Partner | Site Map | Downloads | Contact Us

13000 S Broadway P.O. Box 61129 Los Angeles, California 90061-0129 Phone 800-321-8178 or 310-527-0488 Fax 310-767-1714