|
|
 |
 |
Fast & Efficient Closing of all S-Track Products
The SLS tool is an inexpensive metal ring slider designed for closing Zippertubing S-Track products. It is ideal for both production line and field installations. The S-Track closure mechanism can be closed manually using thumb pressure in most flat ribbon cable applications. However, use of the SLS tool makes closing long cable runs easier, eliminates operator fatigue and minimizes sore fingers. The SLS tool is best suited for S-Track jackets which are to be installed on round wire and cable bundles. Round cable bundles do not provide the operator with a solid surface to apply thumb pressure like flat cables do. Track closure is achieved by inserting the upper and lower halves of the S-Track interlock into the tool and then pulling the tool down the cable run. The tool will form the jacket around the cable, snap the interlock together and close the tubing. The SLS tool functions in a similar fashion to the SLM tool. Refer to the "How to Use" installation instructions for the SLM tool.
|
|
|
|
|
|