 |
ZTD-SP Plier
The ZTD-SP tool is a Stainless Steel plier tool designed for closing Zippertubing D-Track products. It has two roller wheels which engage under the external ears of the D-Track extrusion. Squeezing the handles drives the interlock mechanism together and as the operator pulls the tool along the cable the D-Track jacket forms around the cable harness and is snapped together to form a continuous tube. This tool makes closing D-Track fast and easy while minimizing operator fatigue.
The ZTD-SP tool is primarily intended for use in high volume production line installations where hundreds or thousands of feet of material require closing. For closing small run lengths or performing field installations we suggest using the SLD plastic slider tool.
Order Part Number: ZTD-SP Plier |
|
|
 |
SLD Slider
The SLD tool is an inexpensive plastic slider tool designed for closing Zippertubing D-Track products. It is primarily intended for use in low volume production line applications or field installations. The tool engages the external ears of the D-Track extrusion and snaps the interlock together as it is slid along the cable run. This tool makes closing D-Track fast and easy while minimizing operator fatigue. The tool is used after squeezing the two track halves together manually with your fingers at the end of the jacket. The tool is then slid onto this short section of pre-closed track. The tool is pulled along the cable run which pre-forms the jacket around the cable, snaps the interlock together and forms closed continuous tubing.For closing large quantities of D-Track or long run lengths we suggest using the ZTD-SP plier tool.
Order Part Number: SLD Slider |
|